Thermosetting Powder Coating

Model NO.:FH-030 Usage:Powder Coating, Metal Spray Powder Coating Color:Ral Colors or Pantone Colors Appearance:Powder Method:Spray Components:Resin, Pigment Main Raw Material:Epoxy Polyester Level:Finish Coat Certification:ISO14001, RoHS, ISO9001 Substrate:Steel, Iron, Copper and Other Metals Expiration Date:1 year Formation Mechanism:N/a Packaging:Carton Color on Basis:Ral or Pantone Chart Gloss:Glossy, Semi Glossy or Matt Finish:Smooth or Texture Mark:Neutrial or Designed by Customer Gun:Electrostatic or Tribo Certificate:ISO, RoHS and SGS Factory:We Have Our Own Powder Coating Factory Application:Shelf, Fence, Fan, Security Door and Others Annual Export Quantity:3, 000 Tons 1 Container:19 Tons Trademark:EV Specification:RAL colors or Pantone colors Origin:China HS Code:1111111 Thermosetting Powder coating COLORS AVAILABLE RAL colors coating powder Pantone colors Color-matching regarding customer requirement is available GENERAL TYPES Polyester /Hybrid powder coating Epoxy Powder Coating color Metallic Powder Coating color Hammer tone color powder coating Texture color powder coating powder Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color. PHYSICAL PROPERTIES Specific gravity :1.2 ~ 1.8g/cm3 up to colors Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted) Level of liquidity:24 ~ 27 mm CURING CONDITIONS 180 °C ~ 200 °C (work piece temperature), 10-15 minutes AVERAGE COVERAGE 8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate) PACKING Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.
  STORAGE AND TRANSPORT Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used. HEALTH AND SAFETY Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating  

Mechanical property
Testing items	Standards and methods	Inspecting index
Impact strength	GB/T1732-1993, AS3715 2.8	>50kg/cm
Bending resistance	GB/T1185-88, AS1580 402.1, ISO9227	Pass 2-5 millimeters
Adhesion CHECKED TEST	GB/T9286-88,2mm Cross cut, ISO2409	Pass100/100, passes 0 levels
Cupdrawing:Erichsen, ISO1520	Erichsen, ISO1520	Pass 3-7 millimeters
Pencil hardness	GB/T6739-86, Mitsubishi	Pass H-2H
Chemical resistance and weather resistance
Salt spray test	GB/T1771-91,500 hours	The cross section of corrosion less than 2MM
Hot and damp resistance test	GB/T17740-79(89),1000 hours	Without air bubbles, loses the light slightly
Acid resistance	10% CH3COOH, 240 hours	Without air bubbles, the surface without damage
Alkali resistance	10% NaOH, 240 hours	Without air bubbles, the surface without damage
Heat resistance	200degree,1 hour	The color change is lower than E=1.5
Solvent resistance	MEK24 hours soaked in solvent-free	Without air bubbles, the surface without damage
Uvioresistant	QUV-313,500 hours	Gloss higher than 80% lower than the Munsell color change level
Water tolerance of	2 hours	No bubble, not falling, losing light

We offer free samples to you. You can contact me informatoin as follows,
Attn:Danae

Contact us if you need more details on Thermosetting Powder Coating. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Thermosetting Coating、Thermosetting Powder. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Epoxy-Polyester/ Hybrid